High Speed Large Area Printing Machine
- One Color Machine, Pricing at USD24,746/SET
- Two Colors Machine, Pricing at USD36,294/SET
- Four Colors Machine, Pricing at USD62,690/SET
- Payment by 35% T/T down payment plus 65% T/T payment before delivery
- Lead time is around 30 days to be confirmed by factory.
- Delivery is 7 days after last payment into Seller's account.
- Installation: The manufacturer installs and debugs printing machine in China till good running, Buyer might come to China for training and quality checking and accepting procedures.
- Quality Guaranteed Period: One year if Buyer correctly operates equipments and keep necessary maintenances. Of course, those wearing parts are not listed in guaranteed list. The manufacturer offers long term technical supports and spare parts at costs level.
- All prices here are on USD100=RMB788 EX-WORK factory basis, if the exchange rate fluctuates more than 1%, prices should be adjusted in the last payment according to http://www.bank-of-china.com/en/common/service.jsp
- Offer Date on Oct.13th, 2006
Please contact with Mr.HuaLong Lin to know if this offer is still valid.
Main Performance and Components List
- Printing Width: 100-600mm
- Feeding Width: 150-800mm
- Printing Length: 190-1800mm(Maximum printing girth 1800mm)
- Maximum Mechanical Speed: 100M/minute
- Printing Speed: 10M/minute-80M/minute
- Fixing Precise: Vertical ㊣0.30mm(manual) / Horizontal ㊣0.30mm(manual)
- Roll Spreading Diameter: 600mm
- Roll Collecting Diameter: 600mm
- Collect/Spread Paper Drum/Rubber Roller: Inner Diameter 30-250mm
- Printing Pressure: Mechanical Adjustment
- Drying Method: Infrared Warming, Freely controlled between 0-150 degrees Celsius
- Drying Power: 3KW 每 HongKong origin
- Big Fan: 1.0KW 2 Sets 每 Taiwan origin
- Major Motor: 1.5KW 每 Taiwan origin
- Major Transducer: Panasonic Transducer Timing 每 Japan origin
- Paint Feeding Motor: 60W 每 Taiwan origin
- Common Bearing: NSK 每 Japan origin
- Oneway Bearing: ASNU 每 Germany origin
- Aluminum Alloy Idler Pulley: Hardening Treatment, Oxidation, Dynamic Balancing, Static Balancing
- Automatic Printing Orientation, Auto Materials Loading, Automatic Scaling, Automatic Parting Cut, Automatic Collecting/Rolling, Manual Rolls Replacement, Automatic Materials Discharging
- Automatic Paints Feeding System, Add paints 2-4 times per month, non environmental pollution.
- Easy and convenient operations, precise chromatically, clear photos/letters, stable running, noise less than 90 db, long service life
- Automatically stop paints feeding motor if exceptional, Automatically start paints feeding motor if normal.
- Adopt special made modulus spur-gears, so printing sizes are perfect.
- A wind blower to finalize the design. A heating organ which adopts center thermostatic control system with group control sub-system.
- Lower roller adopts Germany special steel with special process treatment, electroplated with 0.1mm hard chromium protection shield.
- Adopt Taiwan motor, Japan transducer timing, so machine runs smoothly.
- Equipped with 1 set printing forme and 1 set positional adjustment tools.
- This machine is with 1 years guaranteed service life. Normal service life could be more than 10 years.
Suitable for printing roll type materials including:
- Paper 20-150g/m2
- PVC 0.035-0.070mm
- OPP 0.020-0.070mm
- BOPP 0.020-0.060mm
- PE 0.035-0.100mm
- PET 0.020-0.060mm