Pimpex Plastic, China
Contact with Pimpex Plastic, China
Pimpex Plastic - Injection Blow Molding IBM Machines
Google
www www.plasticimpex.com
site search by freefind advanced

Pricing For Two Steps Solution of 2000ml PET Bottles Production
(IM + SBM) - (Injection Molding PET Preforms + Stretch Blow Molding PET Bottles)

Made in China

Injection Molding PET Preforms - IM Step

---1000ml/25g PET Preform Mold, 24 Cavities in 1 Set Mold, USD29,375/SET, with Hot Runner System, Adopt S136 steel on Mold's Inserts with Heat Treatment, Hardness HRC46-50, 1 Million Shots Guaranteed, 3 Million Shots Available if Good Maintenance, Automation Level: PET preforms demolds automatically from the mould, no sprue materials.
---High Speed Plastic Injection Molding (IM) Machine, Model FTN280F2S, USD35,903/SET
---2000ml/45g PET Preform Mold, 24 Cavities in 1 Set Mold, USD30,152/SET, with Hot Runner System, Adopt S136 steel on Mold's Inserts with Heat Treatment, Hardness HRC46-50, 1 Million Shots Guaranteed, 3 Million Shots Available if Good Maintenance, Automation Level: PET preforms demolds automatically from the mould, no sprue materials.
---High Speed Plastic Injection Molding (IM) Machine, Model FT330/380S, USD51,290/SET, with FT330's clamping system and FT380's injection system.
Remarks: The prices are on USD100=RMB682 basis, if the exchange rate fluctuates more than 1%, the prices should be adjusted in last payment according to http://www.boc.cn/sourcedb/whpj/enindex.html
---Payment by 35% T/T Prepayment Plus 65% T/T Last Payment Before Delivery
---Lead Time: 10 days for drawings confirmation, 30 days for machines/molds production, 5 days for quality improvements if necessary.
---Offer Validity: On and before May 31st, 2009.

Plastic Injection Molding Machine
Model FTN280F2S

Plastic Injection Molding Machine FTN160F2
List of Hydraulic & Electric Elements of
Plastic Injection Molding Machine Model FTN280F2S

No

Name

Brand

1

Computer

TECHMATION

2

Proportional Flow
Control & Relief Valves

YUKEN

3

Directional Valve

YUKEN

4

Vane Pump

VICKERS/DENISON

5

Hydraulic Motor

Intermot/Dinamic

6

Air Breaker

CHNT

7

Contactor

SCHNEIDER

8

Thermal Overload Relay

SCHNEIDER

9

Linear Transducer

VISHAY

10

Location Limit Switch

NAiS

11

Seals

BUSAK-SHAMBAN

12

Electromotor

Beijing

The specification are subject to change without notice.

Technical Parameters of
Plastic Injection Molding Machine Model FTN280F2S

PLASTIC INJECTION MOLDING MACHINE

Unit

FTN280 Series

INJECTION UNIT

 

A

B

C

Screw Diameter

mm

55

60

65

Screw L/D Ratio

L/D

24

22

20.3

Shot Size (Theoretical)

cm3

638

760

890

Injection Weight (PS)

g

580

690

810

Injection Rate

g/s

215

255

330

Plasticizing Capacity

g/s

31.8

37.8

44.3

Injection Pressure

MPa

214

180

153

Screw Speed

rpm

0-185

CLAMPING UNIT

 

 

Clamp Tonnage

KN

2800

Toggle Stroke

mm

550

Space Between Tie Bars

mm

580x580

Max.Mold Height

mm

580

Min.Mold Height

mm

200

Ejector Stroke

mm

160

Ejector Tonnage

KN

65

Ejector Number

PC

9

OTHERS

 

 

Max. Pump Pressure

MPa

16

Pump Motor Power

Kw

30

Heater Power

Kw

16.9

Machine Dimension(LxWxH)

m

6.2x1.5x2.0

Machine Weight

t

9.0

Hopper Capacity

Kg

50

Oil Tank Capacity

L

500

Stretch Blow Molding PET Bottles - SBM Step

Fully Automatic Stretch Blow Moulding Machine HZ2000A
(We take HZ2000A for your reference)

Automatic Stretch Blow Molding Machine HZ2000A
Automatic Stretch Blow Molding Mould
2-Cavity Fully Automatic Stretch Blow Molding Machine for PET Bottles & Bottle Mold

Auxiliary Machine for Bottle Molding

Low Air Compressor
Low Air Compressor
High Air Compressor Unit
High Air Compressor Unit
Air Cooling Dryer
Air Cooling Dryer
Air Receiving Tank
Air Receiving Tank
Air Filter
Air Filter
CE Certificate
CE Certificate

Fully Automatic Blow Molding Machine (Model HZ-2000A)

Functions of auxiliary equipments:
1). Air compressor is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.
2). Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.
3). Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles.
4). Air tank is to receive and supply air for the machine as storage.

Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared preheater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the preheater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install, test and start up.
14). Low rejection rate: less than 0.2 percent.

Blow Molding System
Blow Molding System
Robot Hand
Robot Hand
Heating Unit
Heating Unit
Heating Unit
Heating Unit
Sealing System
Sealing System
Robot Hand
Robot Hand
Machine Inside
Machine Inside
Heating Robot Hand
Heating Robot Hand
Festo
Festo
Preforms
Preforms
Bottles
Bottles
Three main features of machine:
1. Upper blowing system ( perfect bottle quality )
2. Enegy saving system ( total 12KW for the whole machine without air supply unit )
3. Dirctly contact filling-machine ( free 3 meters of the conveyer )

HZ2000A Fully Automatic Mould Blowing Machine (2-Cavities)
German FESTO Pneumatic Components and Microcomputer Control System Installed

Item
Description
Unit
Price
1

Main Body of HZ2000A Fully Automatic Mould Blowing Machine (2-Cavities)

1 Set

23,321
2
Auto Transmission Machine
1 Set
3

1.7/30Kg High Air Compressor, Together with Air Receiving Tank (Size 1710x710x1250mm)

1 Set

2,650
4

1.6/12.5Kg Low Air Compressor (Together with Air Receiving Tank) (Size 1800x800x1370mm)

1 Set

1,590
5

1.0/3.0 Air Precision Filter

3 Sets

Free
6

Air Cold Dryer 1.0/30Kg

1 Set

1,060
7
Air Chiller 3A

1 Set

1,060
8

Spare Parts and Tools ( list in details )

1 Set

Free
9
Two Cavities PET Bottle Mould 0.3L or 0.5L, Steel P20, 2,800pcs/hr

1 Set

1,060
10
Two Cavities PET Bottle Mould 1L, Steel P20, 2,600pcs/hr

1 Set

1,272
11

Two Cavities PET Bottle Mould 1.5L, Steel P20, 2,200pcs/hr

1 Set

1,378
12
Two Cavities PET Bottle Mould 2L, Steel P20, 2,000pcs/hr
1 Set
1,590
13
Bottle Conveyer
3 meters
Free
Total FOB Ningbo, China USD:
34,981

Cylinder: Germany FESTO
Electrciity Components: Delex China
PLC: Mistubish Japan ( touch screen )

Remarks: Buyer should make PET preforms by itselfs with injection machine & preforma injection mold.
Remarks: The prices are on USD100=RMB682 basis, if the exchange rate fluctuates more than 1%, the prices should be adjusted in last payment according to http://www.boc.cn/sourcedb/whpj/enindex.html

Other features you may concern on HZ880B for your reference:

Type

Item

Unit

Description

End Product

Material

/

PET/PP/PE/PC

Volume

L

100ml - 2250ml (2 Cavity)

Theoretical Output

Pcs/hr

0.5L: 2800pcs 2-Cavity
1L: 2600pcs 2-Cavity
1.5L: 2200pcs 2-Cavity

Neck of Bottle

mm

22 - 38

Max. Length

mm

350

Max. Diameter

mm

35 - 110 (2 Cavity)

Mould Plate

Max. Mould Plate Dimension

mm

350x450

Max. Mould Thickness

mm

180-260

Clamping Force

KN

300

Mould Opening Stroke (Adjustable)

mm

180-260

Main Body Electricity

Power

KW

12KW

Voltage/Frequency

V/Hz

220-380/50-60

Machine Dimension and Weight

Main Body Dimension LxWxH

cm

225x125x223

Main Body Weight

T

1.6

Air Support Unit High Air Compressor
1 Set
Size 2.2x1.8x2.4M
Low Air Compressor
1 Set
Air Cold Dryer
1 Set
Air Chiller, 0.3-0.5MPa, 10-12, 30L/min
1 Set
Air Receiving Tank
1 Set
 
Total Weight
MT
2.2
Total Electricity
KW
33
Perform Conveyor Dimension (LxWxH)
M
2.0x1.0x2.18
Conveyor Weight
MT
0.4

Spare Parts List of HZ2000A Fully Automatic Mould Blowing Machine (2-Cavities)

Origin of HZ Series Blow Molding Machine's Components

Item Name of Main Spare Parts Brand Name
1 Closing Cylinder German FESTO
2 Stretching Cylinder German FESTO
3 Moving Cylinder German FESTO
4 Mold Lifting Cylinder German FESTO
5 Closing Magnetic Valve German FESTO
6 Stretching Magnetic Valve German FESTO
7 Blowing Magnetic Valve German FESTO
8 Moving Magnetic Valve German FESTO
9 Voltage Regulator China
10 Voltage Switch German
11 Computer Controller Mitsubishi
12 Computer Checking Switch Japan OMRON
13 Infrared Lamp China
14 Moving Valve German FESTO
15 Open Circuit Controller (32A) China-Delex
16 Heat Continue Controller (24A/220V) China-Delex

Service:
Provide whole drawing for the perform mould and bottle mould. Free charge for design on the mould. We can help you install the machine; from setting machine, testing, and to check the machine is on the good working condition. There is a litter charge, only for flight charge and accommodation.

Warranty:
We response for one year warranty for the machine, however, it without any human conduct. And provide one-year free spare part for client. And send engineer to client's company, help install the machine, teaching their staff operate the machine and also, we do have a private school which help our client sending their staff to China, help them training.

Up 15 million shots for the bottle mould.
3 million shots for the perform mould, cap mould
All moulds are designed by CAD/CAM.
We also can provide the drawing for the mould, help you to maintain the mould, and machine.

Delivery time: The machine and mould will be made within 30 working days. And the bottle mould will be finished with in 3 weeks, and the preform mould will be finished in 40-45 days

Payment: 30 T/T prepayment plus 70% T/T last payment after Buyer's approval on the quality of machine & mold in Seller's factory while before delivery.

Go Back Various Pricings for Plastics Related Projects Center

Copyright © www.plasticimpex.com Since 2004