RPM - Pimpex - Logo
Google
www www.plasticimpex.com
Chinese Version Contact with Pimpex@RPM, China
Pimpex@RPM - Xiamen RPM Imp.&Exp. Co.Ltd.

 

Pimpex@RPM supplies plastics recycling solutions such as LDPE film recycling line, jumbo bags recycling line, PS/ABS recycling line, PET recycling line, HDPE/PP recycling line and auxiliary solutions such as water treatment system, film friction washer, sink float tank, squeezer, spinner, label remover, peeler and zig zag air separator.

We are one of your ideal partners in the field of recycling from beginning of negotiation to seeking for best solutions, and from machines manufacturing to after-sales service. Original development from an Europe OEM order from 2002, now with over 150 plastic recycling projects currently in operation, We can give you a clear advice with a tailor made solution on the basis of your plastics and requirements. High efficiency at high capacities, high quality standard recycling plant at reasonable investment, our recycling equipments and lines support operational excellence and economic performance for each customer.

Turnkey Proiects of Plastic Recycling Applications:

HDPE/PP recycling line
HDPE/PP bottles recycling lire
HDPE/PP barrels recycling line
HDPE-2PP-5
Film recycling line
Agriculture film recycling line
Post-consumer film recycling line
EPS-Film recycling line
EPS-film-textile recycling line
LDPE-4
PP fags recycling line
Jumbo bags recycling line
Woven bags recycling line
PP-5
PET recycling line
PET bottles recycling line
PET flakes recycling line
PET-4
WEEE recycling line
Refrigerator recycling line
PS/ABS recycling line
PS-6
Up to now we have more than 150 plastic recycling projects running all over the world.
European Standard Product Quality
European Standard Product Quality
Excellent production: Get affirmation in Japanese and European market for the equipment qualityӣ
Reliable and durable: Machines must be able to accommodate all reasonable contaminates and conditions without catastrophic failure or unreasonable wear.
Security: With CE standard, Ensure security protection both for operators and machines
Lower consumption: With higher efficiency of recycling line, and better machines performance, like utility consumption, the largest single cost of any recycling system is controlled.


Customized Plastic Recycling Solutions
Rich experience of plastic recycling: 17 years in plastic recycling field. With deep research in operation our own plastic recycling factories and fiber factory.
International Technical Team: Seeking the best solution for plastic recycling base on customer requirements and industry trends with our international team.
Detailed Real User Feedback: With detailed user feedbacks for our machines and recycling lines, improve the machines and lines according to the feedbacks.
Material characteristics analysis: Know well of material characteristics on the basis of more than 150 recycling projects all over the world.
Strong Capability for System Integration
Grinder, Auto-sorting, Extrusion, Static Separator, Color Sorting.
We are one of few companies who have the capability of whole recycling system integration.
We have good cooperation with auto-sorting suppliers such as Tomra, Pellence and Sesotec, extrusion suppliers such as Erema and Starlinger.
We already have the running projects which integrated with auto-sorting system, color-sorting and extrusion since 2008. Also working with the static separator system.




Quick and Thoughtful Service
Technical Support: For us, all customers are our own partners in recycling projects, we supply fast and appropriate technical support taking care of mechnical, electrical and processing issues.
Spare Parts: Eventual customized spare parts plants and support, Ensure spare parts can be delivered to customer with short time.
Quick Response: Standing visa for technicians, quick response and able to reach customer factory for service if needed.
Installation: All our washing lines are preassembled in the factory prior shipping. Thus to fit together correctly without costly adjustments.
Testing: We will send a technical team to customer factory for installation, testing and training.

Google
www www.plasticimpex.com
site search by freefind advanced

01 Plastics Recycling Solutions
01 Plastics Recycling Solutions
Vision: Based on high quality, heading for technology innovations and aiming on customer requirements, we are becoming a leading supplier of plastic recycling solutions.
Mission: Focus on recycling technology, concentrate on customer requirements, supply best recycling solutions and high quality recycling equipments. Ensure our solution is always a profitable one, for the customer as well as the environment.
Positioning: We service for the customers who highlight the equipment quality and reliable recycling line performance.
History:
2002: Cooperated with Europe company, for plastic recycling technology improvement. Run 2 plastic recycling factories and one fiber factory.
2006: Set up factory in China, manufactured plastic recycling machines for the Europe company.
2009: Built up brand for plastic recycling lines. Improved film recycling technology with Japanese team.
2019: Implement technology innovation strategy over 150 projects in the overseas.

02 LDPE Film Recycling Line Workshop Layout
02 LDPE Film Recycling Line
Workshop Layout
03 LDPE Film Recycling Line Typical Process
03 LDPE Film Recycling Line
Typical Process
04 LDPE Film Recycling Line Recycled LDPE Granules
04 LDPE Film Recycling Line
Recycled LDPE Granules
05 LDPE Film Recycling Line Workshop 01
05 LDPE Film Recycling Line
Workshop 01
06 LDPE Film Recycling Line Workshop 02
06 LDPE Film Recycling Line
Workshop 02
07 LDPE Film Recycling Line Waste Plastics Films
07 LDPE Film Recycling Line
Waste Plastics Films
Plastic film is valuable secondary resources in recycling market, recycled film can be used to produce wide range of products.
The waste plastic film to be processed can be in different conditions in terms of humidity, contamination, form. The plastic film in recycling market are basically divided into the following families:
Agricultures film (including greenhause, mulching, tunnel and banana film)
Post-consumer film (including film from landfills and selective collections)
Post-commercial and post-industrial film (including materials 100% stretch)
For the film recycling industry, we can offer a series of well-developed recycling lines for the efficient recycling of aII kinds of film materials.

Recycles-4

Typical Process: Feeding Belt, Debaler, Trommel Screening, Sorting Station, Buffer, Shredder, Film Friction Washing, Sink Float Tank, Wet Crushing, Film Friction Washing, Sink Float Tank, Flim Friction Washing, Squeezer, Heating System, Buffer, Extruder System (Green marked ones are optional and to be choosen depending on the material to be processed.)

Estimated Plant Parameters
Model Capacity (output) Power Installed Area Steam Compressed Air Water Supply
LDPE10 1000kgs/hr
450kW 400m2 / 0.5m3 4m3
LDPE15 1500kgs/hr 600kW 600m2 / 0.5m3 6m3
LDPE20 2000kgs/hr 640kW 700m2 / 0.5m3 6m3
Unit Consumption
No. Item Average Consumption Per Ton Flakes No. Item Average Consumption Per Ton Flakes
1 Electricity 190-270kW 3 Washing Detergent 0-5kgs
2 Steam 0-100kgs 4 Water 1.5-2.0T


08 Jumbo Bags Recycling Line Workshop Layout
08 Jumbo Bags Recycling Line
Workshop Layout
09 Jumbo Bags Recycling Line Typical Process
09 Jumbo Bags Recycling Line
Typical Process
10 Jumbo Bags Recycling Line Workshop 01
10 Jumbo Bags Recycling Line
Workshop 01
11 Jumbo Bags Recycling Line Workshop 02
11 Jumbo Bags Recycling Line
Workshop 02
12 Jumbo Bags Recycling Line Waste Jumbo Bags 01
12 Jumbo Bags Recycling Line
Waste Jumbo Bags 01
13 Jumbo Bags Recycling Line Waste Jumbo Bags 02
13 Jumbo Bags Recycling Line
Waste Jumbo Bags 02

The Jumbo bags washing and recycling line is the most valuable secondary resource in the recycling market. Jumbo bags are flexible packaging containers which have the advantages of moisture-proof, dust-proof, firm and safe. Packaging and transporting all kinds of dry products or materials, usually in the form of powder, granules and bottle flakes. Jumbo bag are generally woven from poly-cool fibers such as polypropylene and polyethylene. Jumbo bags are widely used for packaging chemical raw materials, pharmaceutical raw materials, plastic raw materials, food additives, feed additives, metallurgical powder, ore powder, refractory materials and other industries. This Jumbo bags washing and recycling line is specially designed for crushing, washing and drying processes for Jumbo bags.

Recycles-5

Typical Process: Feeding Conveyor Belt, Bag Opener, Roller Screen, Selection Platform, Buffer Storage Bin, Shredder, Film Cleaning Machine, Sink and Float Separation Tank, Wet Crusher, Film Cleaning Machine, Sink and Float Separation Tank, Film Cleaning Machine, High-Speed Dehydrator, Heating System, Belt Type Storage Bin (Green marked ones are optional and to be choosen depending on the material to be processed.)

Estimated Plant Parameters
Model Capacity (output) Power Installed Area Steam Compressed Air Water Supply
PP Bags 05 500kgs/hr
560kW 150m2 / 0.5m3 2m3
PP Bags 10 1000kgs/hr 680kW 300m2 / 0.5m3 4m3
PP Bags 20 2000kgs/hr 750kW 450m2 / 0.5m3 6m3
Unit Consumption
No. Item Average Consumption Per Ton Flakes No. Item Average Consumption Per Ton Flakes
1 Electricity 67-225kW 3 Washing Detergent 2-4kgs
2 Steam / 4 Water 4-6.5T


14 PS ABS Recycling Line Workshop Layout
14 PS ABS Recycling Line
Workshop Layout
15 PS ABS Recycling Line Typical Process
15 PS ABS Recycling Line
Typical Process
16 PS ABS Recycling Line Workshop 01
16 PS ABS Recycling Line
Workshop 01
17 PS ABS Recycling Line Workshop 02
17 PS ABS Recycling Line
Workshop 02
18 PS ABS Recycling Line Waste PS ABS
18 PS ABS Recycling Line
Waste PS ABS
 

PP/ASS recycling line is used for recycling the plastics from the wastes of electronic products and household appliances to get PS, ABS scraps.
This recycling line takes use of density separation (salt water) to get high purity PS and ABS materials with stable performance. Its salt water treatment system is equipped with salt water recycling equipments to stabilize salt water density and reduce salt consumption.
Capacity: 1000kgs/hr, 2000kgs/hr, 3000kgs/hr, 5000kgs/hr

Recycles-6

Typical Process: Feeding Conveyor Belt, Shredder, Z-Type Separator, Crawler-Type Iron Separator, Wet Crusher, High-Efficiency Dewatering Machine, 1# Sink and Float Separation Tank, High-Efficiency Dewatering Machine, 2# Sink and Float Separation Tank, High-Efficiency Dewatering Machine, 3# Sink and Float Separation Tank, High-Efficiency Dehydrator, Automatic Packaging System, Electrostatic Separation, Granulation System (Green marked ones are optional and to be choosen depending on the material to be processed.)

Estimated Plant Parameters
Model Capacity (output) Power Installed Area Steam Compressed Air Water Supply
PS20 2000kgs/hr 300kW 300m2 / 0.5m3 2m3
PS30 3000kgs/hr 400kW 400m2 / 0.5m3 4m3
PS50 5000kgs/hr 726kW 550m2 / 0.5m3 6m3
Unit Consumption
No. Item Average Consumption Per Ton Flakes No. Item Average Consumption Per Ton Flakes
1 Electricity 90-120kW 3 Salt 4-8kgs
2 Steam / 4 Water 1.0-2.0T


19 PET Recycling Line Workshop Layout
19 PET Recycling Line
Workshop Layout
20 PET Recycling Line Typical Process
20 PET Recycling Line
Typical Process
21 PET Recycling Line Workshop 01
21 PET Recycling Line
Workshop 01
22 PET Recycling Line Workshop 02
22 PET Recycling Line
Workshop 02
23 PET Recycling Line Waste PET Materials 01
23 PET Recycling Line
Waste PET Materials 01
24 PET Recycling Line Waste PET Materials 02
24 PET Recycling Line
Waste PET Materials 02

PET bottles recycling becomes an economic opportunity even when the raw material prices are low. With more than 10 years of experience in PET recycling worldwide, we provided that the recycling plant is carefully designed with aim to minimize the operation costs and obtain first-quality PET flakes.
From the long experience gained in manufacturing of a large number of recycling lines, and detailed user feedbacks for all kinds of PET bottles recyclin, we improved the PET recycling solutions continually, granting to the customers both output capacity and flakes quality and low operation costs of the recycling line.

Recycles-1

Typical Process: Feeding Conveyor Belt, Bale Opener, Pre-Selection Conveyor Belt, Crawler-Type Iron Remover, Roller Screen, Whole Bottle Hot Washing System, De-Marking Machine, Selection Platform, Metal Detector, Wet Crusher, 1# Sink and Float Separation Tank, Efficient Dewatering Machine, Buffer Storage Bin, Hot Washing Pot, High-Efficiency Dehydrator, 2# Sink and Float Separation Tank, Octagonal Fast Cold Washer, High-Efficiency Dehydrator, Z-Type Separator, Automatic Bottle Flake Selection System, Automatic Filling Unit (Green marked ones are optional and to be choosen depending on the material to be processed.)

Estimated Plant Parameters
Model Capacity (output) Power Installed Area Steam Compressed Air Water Supply
PET10 1000kgs/hr 220kW 250m2 40000kcal 0.5m3 2m3
PET20 2000kgs/hr 260kW 350m2 60000kcal 0.5m3 3m3
PET30 3000kgs/hr 380kW 500m2 80000kcal 1m3 4.5m3
PET40 4000kgs/hr 500kW 700m2 100000kcal 1m3 6m3
Flakes Quality Reference Table
No. Item AA Level, ppm A Level, ppm
1 PVC Content Max. 25 Max. 100
2 PE/PP/Colored Flakes/Metal/Others Max. 75 Max. 100
3 Total Impurity Max. 100 Max. 200
Factory management will affect the PVC content
Unit Consumption
No. Item Average Consumption Per Ton Flakes No. Item Average Consumption Per Ton Flakes
1 Electricity 70-90kW 3 Washing Detergent 4-8kgs
2 Steam 250-400kg 4 Water 1.0-1.5T


25 HDPE PP Recycling Line Workshop Layout
25 HDPE PP Recycling Line
Workshop Layout
26 HDPE PP Recycling Line Typical Process
26 HDPE PP Recycling Line
Typical Process
27 HDPE PP Recycling Line Workshop 01
27 HDPE PP Recycling Line
Workshop 01
28 HDPE PP Recycling Line Workshop 02
28 HDPE PP Recycling Line
Workshop 02
29 HDPE PP Recycling Line Workshop 03
29 HDPE PP Recycling Line
Workshop 03
30 HDPE PP Recycling Line Workshop 04
30 HDPE PP Recycling Line
Workshop 04
31 HDPE PP Recycling Line Waste HDPE PP
31 HDPE PP Recycling Line
Waste HDPE PP
   

In the field of the recycling plants for HDPE/PP materials coming from urban and industrial collection sites, the HDPE/PP waste vary significantly from country to country, but within the same country, also the materials have different sizes from small to big:
HDPE/PP bottles and containers
HDPE/PP barrels and boxes
HDPE/PP Chairs/desks/pipes
With our tailor made recycling solutions, the most of the worst contaminants are eliminated in early step to reach the best final flakes quality with law consumption.

Recycles-2Recycles-5

Typical Process: Z-Type Separator, Eddy Current Separator, Wet Crusher, High-Efficiency Centrifugal Dewatering Machine, Hot Pot System, Friction Washer, High-Efficiency Centrifugal Dewatering Machine, 1# Rinsing Tank, High-Efficiency Centrifugal Dewatering Machine, 2# Rinsing Tank, High-Efficiency Centrifugation Dewatering Machine, Heating Auger, Z-Type Separator, Buffer Storage Bin, Electrostatic Separation System, Color Sorting System, Filling Unit (Green marked ones are optional and to be choosen depending on the material to be processed.)

Estimated Plant Parameters
Model Capacity (output) Power Installed Area Steam Compressed Air Water Supply
PEPP10 1000kgs/hr 150kW 200m2 / 0.5m3 2m3
PEPP20 2000kgs/hr 190kW 300m2 / 0.5m3 3m3
PEPP30 3000kgs/hr 250kW 400m2 / 1m3 4.5m3
PEPP45 4500kgs/hr 400kW 500m2 / 1m3 6m3
Unit Consumption
No. Item Average Consumption Per Ton Flakes No. Item Average Consumption Per Ton Flakes
1 Electricity 60-85kW 3 Washing Detergent (Optional) 2-4kgs
2 Steam 100-200kgs (Optional) 4 Water 1.0-1.5T


31 Water Treatment System Contrast Before and After Processing
31 Water Treatment System
Contrast Before and After Processing
32 Water Treatment System Typical Process
32 Water Treatment System
Typical Process
33 Water Treatment System Plant 01
33 Water Treatment System
Plant 01
34 Water Treatment System Plant 02
34 Water Treatment System
Plant 02
35 Water Treatment System Plant 03
35 Water Treatment System
Plant 03
36 Water Treatment System Plant 04
36 Water Treatment System
Plant 04
37 Water Treatment System Plant 05
37 Water Treatment System
Plant 05
   

Plastic cleaning wastewater is mostly suspended particulate pollutants, with relatively few dissolved substances, and the amount of water in the cleaning process is large. We have developed a reclaimed water reuse system for plastic recycling lines. The system uses a coagulation sedimentation-air flotation process to treat cleaning wastewater, and uses solid-liquid separation and filtration to directly throttle and settle the sludge to achieve the purpose of reclaimed water reuse.

Flow Chart
When the reclaimed water reuse system treats plastic cleaning wastewater, the main purpose of the treatment is to remove suspended solids (SS) in the water, so that the water is clear again to achieve the purpose of reuse.
1. Sewage properties: cleaning plastic wastewater
2. Sewage water volume: 10-40m3/1hr (according to the customer's on-site cleaning conditions, customized solutions for different treatment volumes)
3. Sewage water quality and effluent indicators after treatment

Water Quality Standards
Project Water Quality before Treatment Effluent Water Quality
Suspended Matter (SS) Max. 2000mg/L Max. 100mg/L
Process Flow
Model Power Land Area Chemical Reagent Cost
WTS10 25.2kW 10m*8m US$4-8 per ton of wastewater


38 Film Friction Washer Film Centrifugal Washing FW6055 FW8090
38 Film Cleaning Machine
Film Friction Washer
Film Centrifugal Washing, FW6055 FW8090
39 Film Friction Washer Film Centrifugal Washing FW6055 FW8090 Three View
39 Film Friction Washer
Film Centrifugal Washing
FW6055 FW8090 Three View
Model FW6055 FW8090
Standard Output 700kgs/hr 2000kgs/hr
Standard Motor Power 55kW 90kW
Output Range 500-900kgs/hr 2000~2500kgs/hr
Length*Width*Height (A*B*C), mm 3600*1800*2370 3752*2306*2730
Inlet Height, mm 2015 2700
Exit Height, mm 1100 1287
Outlet Flange Connection 8" 8"
Inlet Flange Connection 1.5" 1.5"
Rotor Speed, rpm 1000
Poke Plate's Thickness, mm 10
Diameter of Screen Mesh, mm 3-10
Poke Plate's Material Wear-Resistant Material
Screen Material Stainless Steel SS304
Centrifugal Membrane Dehydration
The film cleaning machine is specially designed to clean the film material with high impurity content according to the characteristics of the film material.
The main cleaning part of the film cleaning machine is composed of fast rotating blades, which are used to dewater and clean the film materials.
The material with water enters the equipment cavity from the inlet to be cleaned. The high-speed rotating blade has a strong cleaning effect on the film material, and the particulate impurities and water are discharged through the screen.
Equipment Characteristics:
Reinforced and easily replaceable shafts can ensure the efficient operation of the machine
The material of the blade is wear-resistant steel with long service life
Flexible rotor, equipped with easy-to-replace screen
Dedicated rotor can avoid being blocked by film
Equipped with automatic screen cleaning system
The sieve aperture can be changed according to the grade and type of impurity content.

40 Sink Float Tank PX2000 6 PX2000 11
40 Sink Float Tank
PX2000-6 PX2000-11
41 Sink Float Tank PX2000 6 PX2000 11 Three View
41 Sink Float Tank
PX2000-6 PX2000-11 Three View
Model PX2000-6 PX2000-11
Standard Output (film only) 2 tons/hour 4 tons/hour
Standard Motor power 32.5kW 39.5kW
Tank Shape (Length * Width) 6m*2m 11m*2m
Material Stainless Steel 304
The rinsing tank cleans and separates the materials according to the density of the materials, and can be specially customized according to the different materials. It is equipped with a sinking collecting auger and a sinking discharging auger for continuous discharge. Equipment characteristics:
1. Used in agricultural film, mulch film, packaging bag, banana film, etc., to achieve efficient separation through the basic principle of density separation
2. The rapid and continuous flapping of the blades can break up the piled materials and cause water flow. Using the pressing of the roller and the physical delivery, the materials can be effectively scattered to achieve the effect of cleaning and separating.
3. Due to low operating costs (low maintenance and wear) and low energy consumption, cost-effective (high rate of performance and cost)
4. The tank has sufficient depth and length to ensure the purity of material separation
5. Large cleaning capacity, convenient maintenance, automatic sewage and slag discharge, simple operation












42 Squeezer Film Dewatering SQ4055 SQ5075
42 Squeezer Film Dewatering
SQ4055 SQ5075
43 Squeezer Film Dewatering SQ4055 SQ5075 Three View
43 Squeezer Film Dewatering
SQ4055 SQ5075 Three View
Model SQ4055 SQ5075
Standard Output 500kgs/hr 1400kgs/hr
Standard Motor Power 55kW 75kW
Output Range 400-600kgs/hr 900-1300kgs/hr
Length*Width*Height (A*B*C), mm 2330*915*1800 2620*1620*2400
Inlet Height (C), mm 1800 2400
Exit Height (D), mm 1200 1455
Inlet Size (E*F), mm*mm 368*368 464*464
Spiral Diameter, mm 320 418
Thickness of Spiral Poke Plate, mm 30-50
Spiral Material 38CrMoAl
Screen Thickness, mm 14mm

Extrusion Dewatering Machine (Film Dewatering)
Extrusion dewatering machine is a special equipment specially used in the film cleaning and recycling line, using the propulsion force of the screw to squeeze the film to achieve efficient film dehydration.
The cleaned film is transported to the squeezing dewatering machine. Through the continuous operation of the squeezing screw, the film is continuously squeezed in the cylinder. During the squeezing process, the water is discharged from the screen and due to the strong friction force between the film and the blades, the material heats up due to the squeeze friction, which improves the dehydration effect of the film material.
The material outlet is equipped with a hydraulic valve, and the material dehydration rate is controlled by the automatic opening and closing of the hydraulic valve.
After squeezing, the moisture content of the film is lower than 5-8% depending on the thickness of the film

Equipment Characteristics:
1. Alloy steel spiral has high strength and wear resistance characteristics
2. The screen holes will not be blocked during the extrusion process
3. Heavy-duty steel beam supports ensure smooth operation of equipment
4. Equipped with hard surface gear reducer
5. Optional gearbox water cooling system
Equipped with a separate PLC control box, automatic operation


44 Spinner Centrifugal Dewatering SP220 SP370 SP450 SP550
44 Spinner Centrifugal Dewatering
SP220 SP370 SP450 SP550
45 Spinner Centrifugal Dewatering SP220 SP370 SP450 SP550 Three View
45 Spinner Centrifugal Dewatering
SP220 SP370 SP450 SP550 Three View
Model SP220 SP370
Standard Output 1500kgs/hr 2500kgs/hr
Spindle Speed 1800-2500rpm, adjustable
Output Range, kgs/hr 1000-2000 2000-3000
L*W*H (A*B*C), mm 2180*1600*1750 2750*1610*2100
Motor Power, kW 22 37
Motor Speed, rpm 1450
Height of Water Outlet (D2), mm 700 671
Height of Discharge Opening (D1), mm 630 700
Model SP450 SP550
Standard Output 3000kgs/hr 4500kgs/hr
Spindle Speed 1800-2500rpm, adjustable
Production Range, kgs/hr 3000-4000 4000-5000
L*W*H (A*B*C), mm 2900*2100*1700 2900*2150*1700
Motor Power, kW 45 55
Motor Speed, rpm 1450
Height of Water Outlet (D2), mm 606 601
Height of Discharge Opening (D1), mm 735 735
Each dehydrator has two outlet methods: upper outlet and lower outlet, please choose according to different application methods
High-Efficiency Dehydration Machine (Centrifugal Dehydration)
The high-efficiency centrifugal dewatering machine is used in the cleaning and dehydration of bottle flakes, and the particle impurities and moisture on the bottle flakes are removed by centrifugal force.
The rotating spindle and paddles of the high-efficiency dehydrator are installed in the box, and a screen is installed outside the spindle and paddles.
After the material with water enters the high-efficiency dewatering machine, the high-speed rotating paddle pat/slap the materials. The material impacts the screen under huge kinetic energy, and then rebounds from the screen to fall back. Water and impurities fall through the screen and fall into the bottom collection basin.
There are two ways for the outlet of the dehydrator: upper outlet and lower outlet. The dehydrator at the upper outlet can autonomously transport the dehydrated bottle flakes to the next process.
Equipment Characteristics:
1. Strong body structure design
2. Water-cutting stainless steel body, highly precise
3. SKF bearings, mission life is long
4. Labyrinth seal can prevent plastic powder or water from invading the bearing
5. The feet are damped by the damping device
6. Safety pins and safety bolts protect personal safety and ensure the efficient operation of equipment
7. The paddles are made of wear-resistant materials and have a long service life
8. Quick installation of the screen can save maintenance time

46 Label Remover Peeler LM5011 LM8030
46 Label Remover Peeler
LM5011 LM8030
47 Label Remover Peeler LM5011 LM8030 Three View
47 Label Remover Peeler
LM5011 LM8030 Three View
Model LM5011 LM8030
Standard Output 700kgs/hr 1800kgs/hr
Cavity Diameter, mm 500mm 800mm
Actual Output, kgs/hr 500-1000 1000-2000
Length*Width*Height (A*B*C), mm 4273*2375*3090 4590*2900*3630
Inlet Height (D), mm 2243 2530
Outlet Height (E), mm 1030 1100
Motor Power, kW 11 30
Fan Power, kW 5.5 7.5
High-Efficiency Label Removal Machine (Label Paper Remover)
The stripping machine is mainly used to peel off the label paper on the surface of the PET bottle, especially the PVC or PS label covering the PET bottle.
The high-efficiency de-labeling machine removes the label on the bottle body through the cooperation of the movable knife and the fixed knife. The stripped label falls off from the bottle body, and is still mixed with the PET bottle, and enters the integrated design of the label blowing system, using the difference of wind and gravity to completely separate the bottle body and the label.
Double cutter head design: improve the label stripping rate and extend the service life of the cutter head.
Equipment Characteristics:
1. It can remove labels of different materials such as PVC/PS/PE/PP
2. Maintain the integrity of the bottle and bottleneck and reduce the loss of high-quality bottle top materials
3. Modular fixed knife and movable knife design, easy maintenance operation, low maintenance cost
4. High-quality alloy steel cutter head, prolong the service life
5. The highest rate of one-off bid is up to 94%


48 Zig Zag Air Separator
48 Zig Zag Air Separator
49 Zig Zag Air Separator Three View
49 Zig Zag Air Separator Three View
Model ZZ120
Standard Output (PET/HDPE) 1000kgs/hr
Actual Output (PET/HDPE) 1000-1500kgs/hr
Length*Width*Height (A*B*C), mm 2402*1460*4777
Inlet Height (C), mm 4777
Outlet Height (C-1), mm 610
Motor Power, kW 2.2
Fan Power, kW 10
Cavity Width, mm 1200
Z-Type Separator (Air Flow Sorting)
Z-type sorting machine, also known as air-flow sorting machine, is designed to eliminate light impurities in bottle flakes, such as: paper scraps, label paper, dust in plastic bottle flakes, etc. The stand-alone position is usually placed in the recycling line after the pulverizer or after the dehydration and drying unit.
The working principle of the air separator is to vacuum up the light impurities in the main material flow. The material is evenly distributed in each Z-channel through the screw valve and falls down, and then is collected by the hopper or screw conveyor at the bottom and transported to the next program. During the falling process of the material, light impurities such as dust enter the dust collection bag , Label paper, etc. enter the label paper collector through the airflow.
 



Click submit button, ignore system hint and send email to us.


site search by freefind advanced

  RPM - Rimpex - Logo RPM - Pimpex - Logo RPM - Mimpex - Logo RPM - Logo RPM - Logo RPM - Logo Loowi artToys Logo  
rubberimpex.com plasticimpex.com mouldimpex.com ibmmachine.com isbmmachine.com rubberplasticmould.com Loowi.com

Copyright © Pimpex@RPM Since 2004 www.plasticimpex.com Sitemap Xiamen RPM Imp&Exp Co.,Ltd.