08 Electric Heating Brew Kettle TLB

This equipment is with simple structure, easy for usage. It is a brew kettle with heating, mixing, cooling organs.

09 Thick Juice Filter YTL300

This equipment is mainly used to remove dirties in syrup by filtration process. The filtrated syrup is clear and transparent without odour and special smells.

10 Prepare Kettle TL500

This kettle is to prepare syrup, food grade essence, food grade additives and water till uniformity.

12 Syrup Cooler TL300

This syrup cooler is to cool filtrated syrup to 3-5 degree centigrades to insure air content in beverages. The filtrated syrup is feeded into this syrup cooler first, the evapkorating pipes works with freezing machines to cool syrup.

14 Bottles Rinsing_Filling_Capping
Triad Machine DCGF_24_24_8

This equipment combines rinsing bottles, filling bottles and capping bottles together with PLC control. It is mainly used for plastic bottles with carbonated beverages and non-carbonated beverages.

• All parts contacting with beverages adopt top grade stainless steels whose surfaces are polished till smooth for easy rinsing. The sealing materials is EPDM rubber.
• Adopt PLC as center control, make use of pressure transmitter and electromagnetism pneumatic valve to measure liquid level, keep balance of filling pressure to insure stable liquid level.
• Adopt new type filling valves which are especially designed for plastic bottles. The returned air and the liquid in filling tank are insulated to insure cleanliness of the filled beverages.
• Adopt advanced magnet clutches for capping with adjustable torsional moment to insure capping safely and reliably.

14 Bottles Rinsing_Filling_Capping Triad Machine DCGF_24_24_8

Model: DCGF 24-24-8
Thoughput: 9000pcs/h 330ml bottles
Pour in Pressure: Maximum O.35MPa
Bottles Specification:
Bottles Diameters: 50-100mm
Bottles Heights: 150-340mm
Suitable Cap: Plastic Screw Caps
Total Power: 6.57KW
Gross Weight: 4,500Kgs
Overall Dimension: 2,900x2,200x2,500mm

15 Bottles Warming Machine WPJ4000

This equipment is also used for tea, juice beverages in PET bottles hot filling line, it could make beverages in high temperature filling bottles to 36-40 degree centigrade to keep flavor of tea, juice beverages.

16 Code Printing Machine

This small code printing machine with GUOMEI brand built-in pump adopts closed circuit ink driving system to stop outer enveronment from polluting inks. All filters in whole ink cycle system adopt imported ones to insure ink clean, thus it fundamentally solves the ubiquitous nozzles' block problems. This machine could print 3 lines of Chinese, English letters upto 24x24 lattices with function of self-editting graphics contexts. It is suitable for printing high legible graphics contexts on many kinds of materials.

17 Labels Brander SPC150B

This equipment's speed is 100-200pcs/minutes. Single feeding tray design for shrinkage labels, well situated height, easily setting labels, microcomputer automatic calculations, automatic setting, automatic adjustment, automatic inspection, automatic orientation, quick and easy labels exchange, perfect cutting position.

18 Bottles Blowing Machine CM8Y

This equipment is high pressure vacuum type bottles blowing machine. It is a semiautomatic one suitable for all kinds of PET bottles with capacity 10ml to 2,000ml. It is used to blow mineral water bottles, carbonated beverage bottles, cosmetic bottles and oil bottles.

• Adopt twinshaft crank clamping mould organ, so clamping mould stably and firmly, running fast.
• Adopts far infrared circumrotating type oven for evenly heating.
• Pneumatic system has action section and blowing section to meet with different requirements on air pressures. It could provide stable high pressure to blow abnormity large bottles.
• This machine has muffler and oil adding devices for each part.
• This machine has semiautomatic mode and points operation mode.
• This machine is small, cheap and easy & safe operations.

18 Bottles Blowing Machine CM8Y

Finished Bottles Cubage: Maximum 2,000ml
Maximum Throughput: 1,600pcs/h
Maximum Heating Power: 14KW
Air Source Pressure: 2.5MPa
Maximum Mould Size: 20*35*38cm
Maximum Mould Stroke: 17cm
Center Distance of 2 Bottles: 9cm-20cm
Maximum Stretched Length: 35cm
Weight: 1200kg
Overall Dimension: 160*60*161cm, 187*63*145cm

19 Automatic Thermal Contraction
Package Machine DSA400I

This equipment is widely used for fit together bottles of beverages, foods, pharmaceuticals, chemicals, etc. Not any bottom trays, not any cartons are needed. It is suitable not only for square, round, flat bottles package methods. It is a preferred corollary equipment for beverages filling line.

This equipment has novelty optimized design adopting imported PLC automatic control human-machine interface. It could track well and truly to stop inferior bottles into machine. It stops bottles lack problems, bottles upside down problems with flexible adjustment methods.

It could adjust hot wind cycle loops, it is suitable for available pyrocondensation films including color printing films. It is fast and easy for exchanging films. It has malfunction alarm, safety locks. It runs reliably at low energy consumption. It adopts top grade materials with elaboration for wearable usage.