| WeChat: +86.13328318872 | Home | InSite Search | About Us | Contact Us |
|
|
|
|
|
|
||||
|
Installation of Automatic Injection Blow Molding Plastic Machinery
|
| 5 Operations 5.1 Installation This Automatic Injection Blow Molding Machine need not to be installed on a special foundation, but must be put up on a solid ground or building floor strong enough to bear the weight. The operation plate should be leveled and the four covers of the Automatic Injection Blow Molding Machine fundus must contact well with the ground. |
| Copyright © Pimpex@RPM Since 2002 www.plasticimpex.com Sitemap XIAMEN RPM IMP.&EXP. CO.,LTD. |
